[Fine] OPPO 6607 wire brush brick rescue, tutorial, driver, platform, simple, stable, pure, once.
Brush must see.
1, the data cable as far as possible in the back of the computer USB.
2, open the scrubbing platform, transfer data, and then the phone off state plug in the data cable (different chipset phone scrubbing mode is not the same specific method to enter the scrubbing mode, please carefully check the package inside the tutorial diagram).
3, if you have not installed the driver (there are drivers in the package), the first online will prompt the installation of the driver, after the installation is complete, and then shut down the phone and reconnect the phone once.
4, the progress bar after running, can not disconnect the phone and power, or the phone may become a brick.
5, after the first boot after brushing the phone need to update the system, wait 3 to 10 minutes.